17 KiB
stage | group | info |
---|---|---|
Plan | Project Management | To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments |
Managing issues
GitLab Issues are the fundamental medium for collaborating on ideas and planning work in GitLab.
Key actions for issues include:
Create a new issue
When you create a new issue, you are prompted to fill in the data and fields of the issue, as illustrated below. If you know the values you want to assign to an issue, you can use the Quick actions feature to input values.
While creating an issue, you can associate it to an existing epic from current group by selecting it using Epic dropdown.
Accessing the New Issue form
There are many ways to get to the New Issue form from a project's page:
-
Navigate to your Project's Dashboard > Issues > New Issue:
-
From an open issue in your project, click the vertical ellipsis ({ellipsis_v}) button to open a dropdown menu, and then click New Issue to create a new issue in the same project:
-
From your Project's Dashboard, click the plus sign (+) to open a dropdown menu with a few options. Select New Issue to create an issue in that project:
-
From an Issue Board, create a new issue by clicking on the plus sign (+) at the top of a list. It opens a new issue for that project, pre-labeled with its respective list.
Elements of the New Issue form
Ability to add the new issue to an epic was introduced in GitLab Premium 13.1.
When you're creating a new issue, these are the fields you can fill in:
- Title
- Description
- Checkbox to make the issue confidential
- Assignee
- Weight
- Epic (PREMIUM)
- Due date
- Milestone
- Labels
New issue from the group-level Issue Tracker
Go to the Group dashboard and click Issues in the sidebar to visit the Issue Tracker for all projects in your Group. Select the project you'd like to add an issue for using the dropdown button at the top-right of the page.
The project you selected most recently becomes the default for your next visit. This should save you a lot of time and clicks, if you mostly create issues for the same project.
New issue via Service Desk
Enable Service Desk for your project and offer email support. By doing so, when your customer sends a new email, a new issue can be created in the appropriate project and followed up from there.
New issue via email
A link to Email a new issue to this project is displayed at the bottom of a project's Issues List page. The link is shown only if your GitLab instance has incoming email configured and there is at least one issue in the issue list.
When you click this link, an email address is generated and displayed, which should be used by you only, to create issues in this project. You can save this address as a contact in your email client for quick access.
WARNING: This is a private email address, generated just for you. Keep it to yourself, as anyone who knows it can create issues or merge requests as if they were you. If the address is compromised, or you want to regenerate it, click Email a new issue to this project, followed by reset it.
Sending an email to this address creates a new issue associated with your account for this project, where:
- The email subject becomes the issue title.
- The email body becomes the issue description.
- Markdown and quick actions are supported.
NOTE: In GitLab 11.7, we updated the format of the generated email address. However the older format is still supported, allowing existing aliases or contacts to continue working.
New issue via URL with prefilled fields
To link directly to the new issue page with prefilled fields, use query string parameters in a URL. You can embed a URL in an external HTML page, or create issues with certain fields prefilled.
The title, description, description template, and confidential fields can be prefilled using this method. You cannot pre-fill both the description and description template fields in the same URL because a description template also populates the description field.
Field | URL Parameter Name | Notes |
---|---|---|
title | issue[title] |
|
description | issue[description] |
|
description template | issuable_template |
|
issue type | issue[issue_type] |
Either incident or issue |
confidential | issue[confidential] |
Parameter value must be true to set to confidential |
Follow these examples to form your new issue URL with prefilled fields.
- For a new issue in the GitLab Community Edition project with a pre-filled title
and a pre-filled description, the URL would be
https://gitlab.com/gitlab-org/gitlab-foss/-/issues/new?issue[title]=Validate%20new%20concept&issue[description]=Research%20idea
- For a new issue in the GitLab Community Edition project with a pre-filled title
and a pre-filled description template, the URL would be
https://gitlab.com/gitlab-org/gitlab-foss/-/issues/new?issue[title]=Validate%20new%20concept&issuable_template=Research%20proposal
- For a new issue in the GitLab Community Edition project with a pre-filled title,
a pre-filled description, and the confidential flag set, the URL would be
https://gitlab.com/gitlab-org/gitlab-foss/-/issues/new?issue[title]=Validate%20new%20concept&issue[description]=Research%20idea&issue[confidential]=true
Moving issues
Moving an issue copies it to the target project, and closes it in the originating project. The original issue is not deleted. A system note, which indicates where it came from and went to, is added to both issues.
The "Move issue" button is at the bottom of the right-sidebar when viewing the issue.
Moving issues in bulk (FREE SELF)
If you have advanced technical skills you can also bulk move all the issues from one project to another in the rails console. The below script moves all issues that are not in status closed from one project to another.
To access rails console run sudo gitlab-rails console
on the GitLab server and run the below
script. Please be sure to change project
, admin_user
, and target_project
to your values.
We do also recommend creating a backup before
attempting any changes in the console.
project = Project.find_by_full_path('full path of the project where issues are moved from')
issues = project.issues
admin_user = User.find_by_username('username of admin user') # make sure user has permissions to move the issues
target_project = Project.find_by_full_path('full path of target project where issues moved to')
issues.each do |issue|
if issue.state != "closed" && issue.moved_to.nil?
Issues::MoveService.new(project, admin_user).execute(issue, target_project)
else
puts "issue with id: #{issue.id} and title: #{issue.title} was not moved"
end
end; nil
Closing issues
When you decide that an issue is resolved, or no longer needed, you can close the issue using the close button:
You can also close an issue from the Issue Boards by dragging an issue card from its list and dropping it into the Closed list.
Closing issues automatically
When a commit or merge request resolves issues, the issues can be closed automatically when the commit reaches the project's default branch.
If a commit message or merge request description contains text matching a defined pattern, all issues referenced in the matched text are closed. This happens when the commit is pushed to a project's default branch, or when a commit or merge request is merged into it.
For example, if Closes #4, #6, Related to #5
is included in a Merge Request
description, issues #4
and #6
are closed automatically when the MR is merged, but not #5
.
Using Related to
flags #5
as a related issue,
but is not closed automatically.
If the issue is in a different repository than the MR, add the full URL for the issue(s):
Closes #4, #6, and https://gitlab.com/<username>/<projectname>/issues/<xxx>
For performance reasons, automatic issue closing is disabled for the very first push from an existing repository.
Default closing pattern
When not specified, this default issue closing pattern is used:
\b((?:[Cc]los(?:e[sd]?|ing)|\b[Ff]ix(?:e[sd]|ing)?|\b[Rr]esolv(?:e[sd]?|ing)|\b[Ii]mplement(?:s|ed|ing)?)(:?) +(?:(?:issues? +)?%{issue_ref}(?:(?: *,? +and +| *,? *)?)|([A-Z][A-Z0-9_]+-\d+))+)
This translates to the following keywords:
- Close, Closes, Closed, Closing, close, closes, closed, closing
- Fix, Fixes, Fixed, Fixing, fix, fixes, fixed, fixing
- Resolve, Resolves, Resolved, Resolving, resolve, resolves, resolved, resolving
- Implement, Implements, Implemented, Implementing, implement, implements, implemented, implementing
Note that %{issue_ref}
is a complex regular expression defined inside the GitLab
source code that can match references to:
- A local issue (
#123
). - A cross-project issue (
group/project#123
). - A link to an issue (
https://gitlab.example.com/group/project/issues/123
).
For example the following commit message:
Awesome commit message
Fix #20, Fixes #21 and Closes group/otherproject#22.
This commit is also related to #17 and fixes #18, #19
and https://gitlab.example.com/group/otherproject/issues/23.
closes #18
, #19
, #20
, and #21
in the project this commit is pushed to,
as well as #22
and #23
in group/otherproject
. #17
is not closed as it does
not match the pattern. It works with multi-line commit messages as well as one-liners
when used from the command line with git commit -m
.
Disabling automatic issue closing
Introduced in GitLab 12.7.
The automatic issue closing feature can be disabled on a per-project basis in the project's repository settings. Referenced issues are still displayed, but are not closed automatically.
This only applies to issues affected by new merge requests or commits. Already closed issues remain as-is. Disabling automatic issue closing only affects merge requests in the project and does not prevent other projects from closing it via cross-project issues.
Customizing the issue closing pattern (FREE SELF)
In order to change the default issue closing pattern, GitLab administrators must edit the
gitlab.rb
or gitlab.yml
file
of your installation.
Deleting issues
Introduced in GitLab 8.6.
Users with project owner permission can delete an issue by editing it and clicking on the delete button.
Promote an issue to an epic (PREMIUM)
- Introduced in GitLab Ultimate 11.6.
- Moved to GitLab Premium in 12.8.
- Promoting issues to epics via the UI introduced in GitLab Premium 13.6.
You can promote an issue to an epic in the immediate parent group.
To promote an issue to an epic:
- In an issue, select the vertical ellipsis ({ellipsis_v}) button.
- Select Promote to epic.
Alternatively, you can use the /promote
quick action.
Read more about promoting an issue to an epic on the Manage epics page.
Add an issue to an iteration (PREMIUM)
- Introduced in GitLab 13.2.
- Moved to GitLab Premium in 13.9.
To add an issue to an iteration:
- In an issue sidebar, click Edit next to Iteration. A dropdown appears.
- Click an iteration you'd like to associate this issue with.
You can also use the /iteration
quick action
in a comment or description field.
Real-time sidebar (FREE SELF)
Introduced in GitLab 13.3.
Assignees in the sidebar are updated in real time. This feature is disabled by default. To enable it, you need to enable ActionCable in-app mode.
Cached issue count (FREE SELF)
- Introduced in GitLab 13.9.
- It was deployed behind a feature flag, disabled by default.
- Became enabled by default in GitLab 13.10.
- It's enabled on GitLab.com.
- It's recommended for production use.
- For GitLab self-managed instances, GitLab administrators can opt to disable it (FREE SELF)
WARNING: This feature might not be available to you. Check the version history note above for details.
In a group, the sidebar displays the total count of open issues and this value is cached if higher than 1000. The cached value is rounded to thousands (or millions) and updated every 24 hours.
Similar issues
Introduced in GitLab 11.6.
To prevent duplication of issues for the same topic, GitLab searches for similar issues when new issues are being created.
As you type in the title field of the New Issue page, GitLab searches titles and descriptions across all issues to in the current project. Only issues you have access to are returned. Up to five similar issues, sorted by most recently updated, are displayed below the title box. GraphQL must be enabled to use this feature.
Health status (ULTIMATE)
- Introduced in GitLab Ultimate 12.10.
- Health status of closed issues can't be edited in GitLab Ultimate 13.4 and later.
- Issue health status visible in issue lists introduced in GitLab Ultimate 13.6.
- Feature flag removed in GitLab 13.7.
To help you track issue statuses, you can assign a status to each issue. This marks issues as progressing as planned or needs attention to keep on schedule:
- On track (green)
- Needs attention (amber)
- At risk (red)
After an issue is closed, its health status can't be edited and the Edit button becomes disabled until the issue is reopened.
You can then see issue statuses in the issues list and the epic tree.
Enable or disable cached issue count (FREE SELF)
Cached issue count in the left sidebar is under development but ready for production use. It is deployed behind a feature flag that is enabled by default. GitLab administrators with access to the GitLab Rails console can disable it.
To disable it:
Feature.disable(:cached_sidebar_open_issues_count)
To enable it:
Feature.enable(:cached_sidebar_open_issues_count)