gitlab-org--gitlab-foss/doc/user/project/clusters/add_remove_clusters.md

19 KiB

stage group info
Configure Configure To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments

Adding and removing Kubernetes clusters

GitLab offers integrated cluster creation for the following Kubernetes providers:

  • Google Kubernetes Engine (GKE).
  • Amazon Elastic Kubernetes Service (EKS).

GitLab can also integrate with any standard Kubernetes provider, either on-premise or hosted.

NOTE: Watch the webcast Scalable app deployment with GitLab and Google Cloud Platform and learn how to spin up a Kubernetes cluster managed by Google Cloud Platform (GCP) in a few clicks.

NOTE: Every new Google Cloud Platform (GCP) account receives $300 in credit upon sign up. In partnership with Google, GitLab is able to offer an additional $200 for new GCP accounts to get started with the GitLab integration with Google Kubernetes Engine. Follow this link to apply for credit.

Before you begin

Before adding a Kubernetes cluster using GitLab, you need:

Access controls

  • Restricted service account for deployment was introduced in GitLab 11.5.

When creating a cluster in GitLab, you are asked if you would like to create either:

GitLab creates the necessary service accounts and privileges to install and run GitLab managed applications. When GitLab creates the cluster, a gitlab service account with cluster-admin privileges is created in the default namespace to manage the newly created cluster.

The first time you install an application into your cluster, the tiller service account is created with cluster-admin privileges in the gitlab-managed-apps namespace. This service account is used by Helm to install and run GitLab managed applications.

Helm also creates additional service accounts and other resources for each installed application. Consult the documentation of the Helm charts for each application for details.

If you are adding an existing Kubernetes cluster, ensure the token of the account has administrator privileges for the cluster.

The resources created by GitLab differ depending on the type of cluster.

Important notes

Note the following about access controls:

  • Environment-specific resources are only created if your cluster is managed by GitLab.
  • If your cluster was created before GitLab 12.2, it uses a single namespace for all project environments.

RBAC cluster resources

GitLab creates the following resources for RBAC clusters.

Name Type Details Created when
gitlab ServiceAccount default namespace Creating a new cluster
gitlab-admin ClusterRoleBinding cluster-admin roleRef Creating a new cluster
gitlab-token Secret Token for gitlab ServiceAccount Creating a new cluster
tiller ServiceAccount gitlab-managed-apps namespace Installing Helm charts
tiller-admin ClusterRoleBinding cluster-admin roleRef Installing Helm charts
Environment namespace Namespace Contains all environment-specific resources Deploying to a cluster
Environment namespace ServiceAccount Uses namespace of environment Deploying to a cluster
Environment namespace Secret Token for environment ServiceAccount Deploying to a cluster
Environment namespace RoleBinding admin roleRef Deploying to a cluster

The environment namespace RoleBinding was updated in GitLab 13.6 to admin roleRef. Previously, the edit roleRef was used.

ABAC cluster resources

GitLab creates the following resources for ABAC clusters.

Name Type Details Created when
gitlab ServiceAccount default namespace Creating a new cluster
gitlab-token Secret Token for gitlab ServiceAccount Creating a new cluster
tiller ServiceAccount gitlab-managed-apps namespace Installing Helm charts
tiller-admin ClusterRoleBinding cluster-admin roleRef Installing Helm charts
Environment namespace Namespace Contains all environment-specific resources Deploying to a cluster
Environment namespace ServiceAccount Uses namespace of environment Deploying to a cluster
Environment namespace Secret Token for environment ServiceAccount Deploying to a cluster

Security of runners

Runners have the privileged mode enabled by default, which allows them to execute special commands and run Docker in Docker. This functionality is needed to run some of the Auto DevOps jobs. This implies the containers are running in privileged mode and you should, therefore, be aware of some important details.

The privileged flag gives all capabilities to the running container, which in turn can do almost everything that the host can do. Be aware of the inherent security risk associated with performing docker run operations on arbitrary images as they effectively have root access.

If you don't want to use a runner in privileged mode, either:

  • Use shared runners on GitLab.com. They don't have this security issue.
  • Set up your own runners using the configuration described at shared runners. This involves:
    1. Making sure that you don't have it installed via the applications.
    2. Installing a runner using docker+machine.

Create new cluster

New clusters can be created using GitLab on Google Kubernetes Engine (GKE) or Amazon Elastic Kubernetes Service (EKS) at the project, group, or instance level:

  1. Navigate to your:
    • Project's {cloud-gear} Operations > Kubernetes page, for a project-level cluster.
    • Group's {cloud-gear} Kubernetes page, for a group-level cluster.
    • Admin Area > {cloud-gear} Kubernetes page, for an instance-level cluster.
  2. Click Add Kubernetes cluster.
  3. Click the Create new cluster tab.
  4. Click either Amazon EKS or Google GKE, and follow the instructions for your desired service:

After creating a cluster, you can install runners for it as described in GitLab Managed Apps.

Add existing cluster

If you have an existing Kubernetes cluster, you can add it to a project, group, or instance.

Kubernetes integration isn't supported for arm64 clusters. See the issue Helm Tiller fails to install on arm64 cluster for details.

After adding an existing cluster, you can install runners for it as described in GitLab Managed Apps.

Existing Kubernetes cluster

To add a Kubernetes cluster to your project, group, or instance:

  1. Navigate to your:

    1. Project's {cloud-gear} Operations > Kubernetes page, for a project-level cluster.
    2. Group's {cloud-gear} Kubernetes page, for a group-level cluster.
    3. Admin Area > {cloud-gear} Kubernetes page, for an instance-level cluster.
  2. Click Add Kubernetes cluster.

  3. Click the Add existing cluster tab and fill in the details:

    1. Kubernetes cluster name (required) - The name you wish to give the cluster.

    2. Environment scope (required) - The associated environment to this cluster.

    3. API URL (required) - It's the URL that GitLab uses to access the Kubernetes API. Kubernetes exposes several APIs, we want the "base" URL that is common to all of them. For example, https://kubernetes.example.com rather than https://kubernetes.example.com/api/v1.

      Get the API URL by running this command:

      kubectl cluster-info | grep -E 'Kubernetes master|Kubernetes control plane' | awk '/http/ {print $NF}'
      
    4. CA certificate (required) - A valid Kubernetes certificate is needed to authenticate to the cluster. We use the certificate created by default.

      1. List the secrets with kubectl get secrets, and one should be named similar to default-token-xxxxx. Copy that token name for use below.

      2. Get the certificate by running this command:

        kubectl get secret <secret name> -o jsonpath="{['data']['ca\.crt']}" | base64 --decode
        

        If the command returns the entire certificate chain, you must copy the Root CA certificate and any intermediate certificates at the bottom of the chain. A chain file has following structure:

           -----BEGIN MY CERTIFICATE-----
           -----END MY CERTIFICATE-----
           -----BEGIN INTERMEDIATE CERTIFICATE-----
           -----END INTERMEDIATE CERTIFICATE-----
           -----BEGIN INTERMEDIATE CERTIFICATE-----
           -----END INTERMEDIATE CERTIFICATE-----
           -----BEGIN ROOT CERTIFICATE-----
           -----END ROOT CERTIFICATE-----
        
    5. Token - GitLab authenticates against Kubernetes using service tokens, which are scoped to a particular namespace. The token used should belong to a service account with cluster-admin privileges. To create this service account:

      1. Create a file called gitlab-admin-service-account.yaml with contents:

        apiVersion: v1
        kind: ServiceAccount
        metadata:
          name: gitlab
          namespace: kube-system
        ---
        apiVersion: rbac.authorization.k8s.io/v1beta1
        kind: ClusterRoleBinding
        metadata:
          name: gitlab-admin
        roleRef:
          apiGroup: rbac.authorization.k8s.io
          kind: ClusterRole
          name: cluster-admin
        subjects:
          - kind: ServiceAccount
            name: gitlab
            namespace: kube-system
        
      2. Apply the service account and cluster role binding to your cluster:

        kubectl apply -f gitlab-admin-service-account.yaml
        

        You need the container.clusterRoleBindings.create permission to create cluster-level roles. If you do not have this permission, you can alternatively enable Basic Authentication and then run the kubectl apply command as an administrator:

        kubectl apply -f gitlab-admin-service-account.yaml --username=admin --password=<password>
        

        NOTE: Basic Authentication can be turned on and the password credentials can be obtained using the Google Cloud Console.

        Output:

        serviceaccount "gitlab" created
        clusterrolebinding "gitlab-admin" created
        
      3. Retrieve the token for the gitlab service account:

        kubectl -n kube-system describe secret $(kubectl -n kube-system get secret | grep gitlab | awk '{print $1}')
        

        Copy the <authentication_token> value from the output:

        Name:         gitlab-token-b5zv4
        Namespace:    kube-system
        Labels:       <none>
        Annotations:  kubernetes.io/service-account.name=gitlab
                     kubernetes.io/service-account.uid=bcfe66ac-39be-11e8-97e8-026dce96b6e8
        
        Type:  kubernetes.io/service-account-token
        
        Data
        ====
        ca.crt:     1025 bytes
        namespace:  11 bytes
        token:      <authentication_token>
        

      NOTE: For GKE clusters, you need the container.clusterRoleBindings.create permission to create a cluster role binding. You can follow the Google Cloud documentation to grant access.

    6. GitLab-managed cluster - Leave this checked if you want GitLab to manage namespaces and service accounts for this cluster. See the Managed clusters section for more information.

    7. Project namespace (optional) - You don't have to fill it in; by leaving it blank, GitLab creates one for you. Also:

      • Each project should have a unique namespace.
      • The project namespace is not necessarily the namespace of the secret, if you're using a secret with broader permissions, like the secret from default.
      • You should not use default as the project namespace.
      • If you or someone created a secret specifically for the project, usually with limited permissions, the secret's namespace and project namespace may be the same.
  4. Finally, click the Create Kubernetes cluster button.

After a couple of minutes, your cluster is ready. You can now proceed to install some pre-defined applications.

Disable Role-Based Access Control (RBAC) (optional)

When connecting a cluster via GitLab integration, you may specify whether the cluster is RBAC-enabled or not. This affects how GitLab interacts with the cluster for certain operations. If you did not check the RBAC-enabled cluster checkbox at creation time, GitLab assumes RBAC is disabled for your cluster when interacting with it. If so, you must disable RBAC on your cluster for the integration to work properly.

RBAC

WARNING: Disabling RBAC means that any application running in the cluster, or user who can authenticate to the cluster, has full API access. This is a security concern, and may not be desirable.

To effectively disable RBAC, global permissions can be applied granting full access:

kubectl create clusterrolebinding permissive-binding \
  --clusterrole=cluster-admin \
  --user=admin \
  --user=kubelet \
  --group=system:serviceaccounts

Enabling or disabling integration

The Kubernetes cluster integration enables after you have successfully either created a new cluster or added an existing one. To disable Kubernetes cluster integration:

  1. Navigate to your:
    • Project's {cloud-gear} Operations > Kubernetes page, for a project-level cluster.
    • Group's {cloud-gear} Kubernetes page, for a group-level cluster.
    • Admin Area > {cloud-gear} Kubernetes page, for an instance-level cluster.
  2. Click on the name of the cluster.
  3. Click the GitLab Integration toggle.
  4. Click Save changes.

Removing integration

To remove the Kubernetes cluster integration from your project, first navigate to the Advanced Settings tab of the cluster details page and either:

  • Select Remove integration, to remove only the Kubernetes integration.
  • From GitLab 12.6, select Remove integration and resources, to also remove all related GitLab cluster resources (for example, namespaces, roles, and bindings) when removing the integration.

When removing the cluster integration, note:

  • You need Maintainer permissions and above to remove a Kubernetes cluster integration.
  • When you remove a cluster, you only remove its relationship to GitLab, not the cluster itself. To remove the cluster, you can do so by visiting the GKE or EKS dashboard, or using kubectl.

Learn more

To learn more on automatically deploying your applications, read about Auto DevOps.

Troubleshooting

There was a problem authenticating with your cluster. Please ensure your CA Certificate and Token are valid

If you encounter this error while adding a Kubernetes cluster, ensure you're properly pasting the service token. Some shells may add a line break to the service token, making it invalid. Ensure that there are no line breaks by pasting your token into an editor and removing any additional spaces.