gitlab-org--gitlab-foss/doc/development/doc_styleguide.md

394 lines
15 KiB
Markdown

# Documentation style guidelines
The documentation style guide defines the markup structure used in
GitLab documentation. Check the
[documentation guidelines](writing_documentation.md) for general development instructions.
Check the GitLab hanbook for the [writing styles guidelines](https://about.gitlab.com/handbook/communication/#writing-style-guidelines).
## Text
- Split up long lines (wrap text), this makes it much easier to review and edit. Only
double line breaks are shown as a full line break in [GitLab markdown][gfm].
80-100 characters is a good line length
- Make sure that the documentation is added in the correct
[directory](writing_documentation.md#documentation-directory-structure) and that
there's a link to it somewhere useful
- Do not duplicate information
- Be brief and clear
- Unless there's a logical reason not to, add documents in alphabetical order
- Write in US English
- Use [single spaces][] instead of double spaces
- Jump a line between different markups (e.g., after every paragraph, hearder, list, etc)
- Capitalize "G" and "L" in GitLab
- Capitalize feature, products, and methods names. E.g.: GitLab Runner, Geo,
Issue Boards, Git, Prometheus, Continuous Integration.
## Formatting
- Use dashes (`-`) for unordered lists instead of asterisks (`*`)
- Use the number one (`1`) for ordered lists
- Use underscores (`_`) to mark a word or text in italics
- Use double asterisks (`**`) to mark a word or text in bold
- When using lists, prefer not to end each item with a period. You can use
them if there are multiple sentences, just keep the last sentence without
a period
## Headings
- Add only one H1 title in each document, by adding `#` at the beginning of
it (when using markdown). For subheadings, use `##`, `###` and so on
- Avoid putting numbers in headings. Numbers shift, hence documentation anchor
links shift too, which eventually leads to dead links. If you think it is
compelling to add numbers in headings, make sure to at least discuss it with
someone in the Merge Request
- [Avoid using symbols and special chars](https://gitlab.com/gitlab-com/gitlab-docs/issues/84)
in headers. Whenever possible, they should be plain and short text.
- Avoid adding things that show ephemeral statuses. For example, if a feature is
considered beta or experimental, put this info in a note, not in the heading.
- When introducing a new document, be careful for the headings to be
grammatically and syntactically correct. Mention one or all
of the following GitLab members for a review: `@axil` or `@marcia`.
This is to ensure that no document with wrong heading is going
live without an audit, thus preventing dead links and redirection issues when
corrected
- Leave exactly one newline after a heading
## Links
- Use the regular inline link markdown markup `[Text](https://example.com)`.
It's easier to read, review, and maintain.
- If there's a link that repeats several times through the same document,
you can use `[Text][identifier]` and at the bottom of the section or the
document add: `[identifier]: https://example.com`, in which case, we do
encourage you to also add an alternative text: `[identifier]: https://example.com "Alternative text"` that appears when hovering your mouse on a link.
- To link to internal documentation, use relative links, not full URLs. Use `../` to
navigate tp high-level directories, and always add the file name `file.md` at the
end of the link with the `.md` extension, not `.html`.
Example: instead of `[text](../../merge_requests/)`, use
`[text](../../merge_requests/index.md)` or, `[text](../../ci/README.md)`, or,
for anchor links, `[text](../../ci/README.md#examples)`.
Using the markdown extension is necessary for the [`/help`](writing_documentation.md#gitlab-help)
section of GitLab.
- To link from CE to EE-only documentation, use the EE-only doc full URL.
- Use [meaningful anchor texts](https://www.futurehosting.com/blog/links-should-have-meaningful-anchor-text-heres-why/).
E.g., instead of writing something like `Read more about GitLab Issue Boards [here](LINK)`,
write `Read more about [GitLab Issue Boards](LINK)`.
## Images
- Place images in a separate directory named `img/` in the same directory where
the `.md` document that you're working on is located. Always prepend their
names with the name of the document that they will be included in. For
example, if there is a document called `twitter.md`, then a valid image name
could be `twitter_login_screen.png`. [**Exception**: images for
[articles](writing_documentation.md#technical-articles) should be
put in a directory called `img` underneath `/articles/article_title/img/`, therefore,
there's no need to prepend the document name to their filenames.]
- Images should have a specific, non-generic name that will differentiate them.
- Keep all file names in lower case.
- Consider using PNG images instead of JPEG.
- Compress all images with <https://tinypng.com/> or similar tool.
- Compress gifs with <https://ezgif.com/optimize> or similar tool.
- Images should be used (only when necessary) to _illustrate_ the description
of a process, not to _replace_ it.
Inside the document:
- The Markdown way of using an image inside a document is:
`![Proper description what the image is about](img/document_image_title.png)`
- Always use a proper description for what the image is about. That way, when a
browser fails to show the image, this text will be used as an alternative
description
- If there are consecutive images with little text between them, always add
three dashes (`---`) between the image and the text to create a horizontal
line for better clarity
- If a heading is placed right after an image, always add three dashes (`---`)
between the image and the heading
## Notes
- Notes should be quoted with the word `Note:` being bold. Use this form:
```md
>**Note:**
This is something to note.
```
which renders to:
>**Note:**
This is something to note.
If the note spans across multiple lines it's OK to split the line.
## Specific sections and terms
To mention and/or reference specific terms in GitLab, please follow the styles
below.
### GitLab versions and tiers
- Every piece of documentation that comes with a new feature should declare the
GitLab version that feature got introduced. Right below the heading add a
note:
```md
> Introduced in GitLab 8.3.
```
- If possible every feature should have a link to the MR, issue, or epic that introduced it.
The above note would be then transformed to:
```md
> [Introduced][ce-1242] in GitLab 8.3.
```
, where the [link identifier](#links) is named after the repository (CE) and
the MR number.
- If the feature is only available in GitLab Enterprise Edition, don't forget to mention
the [paid tier](https://about.gitlab.com/handbook/marketing/product-marketing/#tiers)
the feature is available in:
```md
> [Introduced][ee-1234] in [GitLab Starter](https://about.gitlab.com/products/) 8.3.
```
Otherwise, leave this mention out.
### GitLab Restart
There are many cases that a restart/reconfigure of GitLab is required. To
avoid duplication, link to the special document that can be found in
[`doc/administration/restart_gitlab.md`][doc-restart]. Usually the text will
read like:
```
Save the file and [reconfigure GitLab](../administration/restart_gitlab.md)
for the changes to take effect.
```
If the document you are editing resides in a place other than the GitLab CE/EE
`doc/` directory, instead of the relative link, use the full path:
`http://docs.gitlab.com/ce/administration/restart_gitlab.html`.
Replace `reconfigure` with `restart` where appropriate.
### Installation guide
**Ruby:**
In [step 2 of the installation guide](../install/installation.md#2-ruby),
we install Ruby from source. Whenever there is a new version that needs to
be updated, remember to change it throughout the codeblock and also replace
the sha256sum (it can be found in the [downloads page][ruby-dl] of the Ruby
website).
[ruby-dl]: https://www.ruby-lang.org/en/downloads/ "Ruby download website"
### Configuration documentation for source and Omnibus installations
GitLab currently officially supports two installation methods: installations
from source and Omnibus packages installations.
Whenever there is a setting that is configurable for both installation methods,
prefer to document it in the CE docs to avoid duplication.
Configuration settings include:
- settings that touch configuration files in `config/`
- NGINX settings and settings in `lib/support/` in general
When there is a list of steps to perform, usually that entails editing the
configuration file and reconfiguring/restarting GitLab. In such case, follow
the style below as a guide:
```md
**For Omnibus installations**
1. Edit `/etc/gitlab/gitlab.rb`:
```ruby
external_url "https://gitlab.example.com"
```
1. Save the file and [reconfigure] GitLab for the changes to take effect.
---
**For installations from source**
1. Edit `config/gitlab.yml`:
```yaml
gitlab:
host: "gitlab.example.com"
```
1. Save the file and [restart] GitLab for the changes to take effect.
[reconfigure]: path/to/administration/restart_gitlab.md#omnibus-gitlab-reconfigure
[restart]: path/to/administration/restart_gitlab.md#installations-from-source
```
In this case:
- before each step list the installation method is declared in bold
- three dashes (`---`) are used to create a horizontal line and separate the
two methods
- the code blocks are indented one or more spaces under the list item to render
correctly
- different highlighting languages are used for each config in the code block
- the [references](#references) guide is used for reconfigure/restart
### Fake tokens
There may be times where a token is needed to demonstrate an API call using
cURL or a secret variable used in CI. It is strongly advised not to use real
tokens in documentation even if the probability of a token being exploited is
low.
You can use the following fake tokens as examples.
| **Token type** | **Token value** |
| --------------------- | --------------------------------- |
| Private user token | `9koXpg98eAheJpvBs5tK` |
| Personal access token | `n671WNGecHugsdEDPsyo` |
| Application ID | `2fcb195768c39e9a94cec2c2e32c59c0aad7a3365c10892e8116b5d83d4096b6` |
| Application secret | `04f294d1eaca42b8692017b426d53bbc8fe75f827734f0260710b83a556082df` |
| Secret CI variable | `Li8j-mLUVA3eZYjPfd_H` |
| Specific Runner token | `yrnZW46BrtBFqM7xDzE7dddd` |
| Shared Runner token | `6Vk7ZsosqQyfreAxXTZr` |
| Trigger token | `be20d8dcc028677c931e04f3871a9b` |
| Webhook secret token | `6XhDroRcYPM5by_h-HLY` |
| Health check token | `Tu7BgjR9qeZTEyRzGG2P` |
| Request profile token | `7VgpS4Ax5utVD2esNstz` |
### API
Here is a list of must-have items. Use them in the exact order that appears
on this document. Further explanation is given below.
- Every method must have the REST API request. For example:
```
GET /projects/:id/repository/branches
```
- Every method must have a detailed
[description of the parameters](#method-description).
- Every method must have a cURL example.
- Every method must have a response body (in JSON format).
#### Method description
Use the following table headers to describe the methods. Attributes should
always be in code blocks using backticks (``` ` ```).
```
| Attribute | Type | Required | Description |
| --------- | ---- | -------- | ----------- |
```
Rendered example:
| Attribute | Type | Required | Description |
| --------- | ---- | -------- | ----------- |
| `user` | string | yes | The GitLab username |
#### cURL commands
- Use `https://gitlab.example.com/api/v4/` as an endpoint.
- Wherever needed use this personal access token: `9koXpg98eAheJpvBs5tK`.
- Always put the request first. `GET` is the default so you don't have to
include it.
- Use double quotes to the URL when it includes additional parameters.
- Prefer to use examples using the personal access token and don't pass data of
username and password.
| Methods | Description |
| ------- | ----------- |
| `-H "PRIVATE-TOKEN: 9koXpg98eAheJpvBs5tK"` | Use this method as is, whenever authentication needed |
| `-X POST` | Use this method when creating new objects |
| `-X PUT` | Use this method when updating existing objects |
| `-X DELETE` | Use this method when removing existing objects |
#### cURL Examples
Below is a set of [cURL][] examples that you can use in the API documentation.
##### Simple cURL command
Get the details of a group:
```bash
curl --header "PRIVATE-TOKEN: 9koXpg98eAheJpvBs5tK" https://gitlab.example.com/api/v4/groups/gitlab-org
```
##### cURL example with parameters passed in the URL
Create a new project under the authenticated user's namespace:
```bash
curl --request POST --header "PRIVATE-TOKEN: 9koXpg98eAheJpvBs5tK" "https://gitlab.example.com/api/v4/projects?name=foo"
```
##### Post data using cURL's --data
Instead of using `-X POST` and appending the parameters to the URI, you can use
cURL's `--data` option. The example below will create a new project `foo` under
the authenticated user's namespace.
```bash
curl --data "name=foo" --header "PRIVATE-TOKEN: 9koXpg98eAheJpvBs5tK" "https://gitlab.example.com/api/v4/projects"
```
##### Post data using JSON content
> **Note:** In this example we create a new group. Watch carefully the single
and double quotes.
```bash
curl --request POST --header "PRIVATE-TOKEN: 9koXpg98eAheJpvBs5tK" --header "Content-Type: application/json" --data '{"path": "my-group", "name": "My group"}' https://gitlab.example.com/api/v4/groups
```
##### Post data using form-data
Instead of using JSON or urlencode you can use multipart/form-data which
properly handles data encoding:
```bash
curl --request POST --header "PRIVATE-TOKEN: 9koXpg98eAheJpvBs5tK" --form "title=ssh-key" --form "key=ssh-rsa AAAAB3NzaC1yc2EA..." https://gitlab.example.com/api/v4/users/25/keys
```
The above example is run by and administrator and will add an SSH public key
titled ssh-key to user's account which has an id of 25.
##### Escape special characters
Spaces or slashes (`/`) may sometimes result to errors, thus it is recommended
to escape them when possible. In the example below we create a new issue which
contains spaces in its title. Observe how spaces are escaped using the `%20`
ASCII code.
```bash
curl --request POST --header "PRIVATE-TOKEN: 9koXpg98eAheJpvBs5tK" "https://gitlab.example.com/api/v4/projects/42/issues?title=Hello%20Dude"
```
Use `%2F` for slashes (`/`).
##### Pass arrays to API calls
The GitLab API sometimes accepts arrays of strings or integers. For example, to
restrict the sign-up e-mail domains of a GitLab instance to `*.example.com` and
`example.net`, you would do something like this:
```bash
curl --request PUT --header "PRIVATE-TOKEN: 9koXpg98eAheJpvBs5tK" --data "domain_whitelist[]=*.example.com" --data "domain_whitelist[]=example.net" https://gitlab.example.com/api/v4/application/settings
```
[cURL]: http://curl.haxx.se/ "cURL website"
[single spaces]: http://www.slate.com/articles/technology/technology/2011/01/space_invaders.html
[gfm]: http://docs.gitlab.com/ce/user/markdown.html#newlines "GitLab flavored markdown documentation"
[ce-1242]: https://gitlab.com/gitlab-org/gitlab-ce/issues/1242
[doc-restart]: ../administration/restart_gitlab.md "GitLab restart documentation"